8
Using the Digital Audio Baby Monitor
3. Using the Digital Audio Baby
Monitor
Please read these instructions carefully, and be aware that this baby monitor
is only intended as an aid. It is not a substitute for responsible, correct
parental supervision.
3.1 Power on/off the parent unit
1. When the parent unit is off, press and hold
0
until the Link Indicator is
on. The parent unit is now powered on and will search for and link itself
to the baby unit.
2. When the parent unit is on, press and hold
0
until the Link Indicator
turns off. The parent unit is now powered off.
3.2 Power on/off the baby unit
1. When the baby unit is off, press and hold
0
until the Power Indicator is
on. The baby unit is now powered on.
2. When the baby unit is on, press and hold
0
until the Power Indicator
turns off. The baby unit is now powered off.
NOTE
Do not place the parent and baby units too close together, or you may hear a
high pitched noise. This is not a fault. The units are designed to be operated
at some distance apart, e.g. in separate rooms.
3.3 Set nightlight
The nightlight feature is for giving the room a soft glow so the baby can be
observed without disrupting it with bright lights.
1. When the nightlight is off, press
1
to turn it on.
2. When the nightlight is on, press
1
to turn it off.
3.4 Adjust speaker volume
There are 6 volume levels on the parent unit, including volume off.
Press
+
to increase or
-
to decrease the volume of the parent unit
respectively. The sound level LEDs will light up while adjusting the volume,
to indicate the set level from 0 (off), 1 (quiet) to 5 (loud).
