A96462
VSLT-UP
8/13/2010
INSTALLATION INSTRUCTIONS
CATALOG NUMBER
PART NO.
APPRVD
DATE
DATE
REV.
16555 East Gale Avenue
City of Industry, CA 91745
(626)968-5666
24.86
4.16
8.31
11.16
8.16
1.28
2.07
4.14
(4)
O
.39"
THRU HOLES
O
1.75
WIRE
WAY
1
1
(BY OTHERS)
INCOMING
WIRE LEADS
MOUNTING
HARDWARE
(BY OTHERS)
MOUNTING
SILICONE
ALL SURFACES
FIXTURE
ASSEMBLY
MOUNTING PLATE
JUNCTION BOX
EGRESS
LAMP SOCKET
EGRESS
EGRESS WIRING
TO 12 VOLT DC
(BEHIND PLATE)
WIRE CONNECTIONS
(BY OTHERS)
TURN OFF POWER.
RE-LAMPING:
2.
LAMP
MOUNTING PLATE
FRONT VIEW
SET SCREW
(4) P/N A84267
1/4-20 UNC X .63 LG
INSTALLATION COMPLETE.
4.
3.
1. TURN OFF POWER.
BALLAST SERVICING:
2.
LAMP SOCKET
1.
TURN OFF POWER.
INSTALLATION
2.
SERVICE BALLAST.
3.
4.
5.
6.
SURFACE
3.
4.
5.
1. TURN OFF POWER.
2.
6.
7.
3.
4.
EQUIPMENT GROUND.
5.
1.
PULL INCOMING WIRE LEADS THROUGH WIREWAY
NOTE: TO BE MOUNTED INDEPENDENT OF JUNCTION
BOX. (MOUNTING HARDWARE BY OTHERS)
MAKE WIRE CONNECTIONS FROM INCOMING WIRE
LEADS TO FIXTURE ASSEMBLY. (WHITE TO WHITE,
BLACK TO BLACK, GREEN TO GREEN.)
NOTE: CONNECT GREEN GROUND LEAD TO
MEETS THE MOUNTING SURFACE.
THE EGRESS SOCKET MUST BE WIRED TO A
SEPARATE EMERGENCY CIRCUIT (12 VOLT D.C.)
MAKE WIRE CONNECTIONS.
RETURN FIXTURE HEAD ASSEMBLY TO TOP OF BODY
AND SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS.
INSTALLATION COMPLETE
PLATE DISCONNECT WIRES. FIXTURE MUST BE
SUPPORTED DURING SERVICING.
REMOVE (3) 8-32 CAPTIVE SCREWS FROM TOP LID. PULL
UP ON LID TO ACCESS LAMP SOCKET, AND INSTALL LAMP.
RETURN LID AND SCREWS TO ORIGINAL POSITION
AND TIGHTEN SCREWS SECURELY.
LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY
LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL
CANOPY AND LIFT FIXTURE ASSEMBLY AWAY
RE-LAMPING EGRESS LAMP
INSTALLATION COMPLETE.
REMOVE MR-11 LAMP FROM SOCKET AND REPLACE.
(4) 1/4-20 x 5/8" SET SCREWS.
INSTALLATION COMPLETE.
SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS.
FROM MOUNTING PLATE.
AND LIFT FIXTURE ASSEMBLY AWAY FROM MOUNTING
(3) 8-32 CAPTIVE
SCREWS
AND SECURE MOUNTING PLATE TO MOUNTING SURFACE.
SECURE FIXTURE ASSEMBLY TO MOUNTING PLATE WITH
SILICONE ALL AROUND MOUNTING PLATE WHERE PLATE
RETURN FIXTURE ASSEMBLY TO MOUNTING PLATE AND
