INSTALLATION INSTRUCTIONS - LUMASQUARE SHEET 2 OF 2
SAVE THESE INSTRUCTIONS
701 Millennium Boulevard Greenville, SC 29607 (864) 678-1000
www.hubbelloutdoor.com
1A. Pendant Mounting
1.
Install ¾” threaded pipe into the opening of the housing
and
tighten provided set screw
•
Note:
When using fixture as a pendant mount use waterproof pipe
joint compound. (Not Provided)
1B. Surface/J-Box Mounting
1.
Remove mounting bracket
from the fixture by loosening screws
and , then sliding the mounting bracket in direction
indicated, then lifting away from the fixture
2.
Install Mounting Bracket to the surface or J-Box using the hole pattern
provided. (Hardware provided by others)
3.
On fixture, tilt the wire form up. Slide the wire form over the
hook on the mounting bracket.
4.
Connect the supply wires in accordance with local and National Electrical
Codes. Push excess wires in to the junction box.
5.
Lift the fixture off the hook and guide the fixture onto the feet of the
mounting bracket . Once the mounting feet are engaged, slide the
fixture towards the hook on the mounting bracket.
6.
Secure the fixture by retightening mounting screws
and
2
4
2
3
1
1
5
4
1
5
6
6
7
3
4
5
7
6
WIRING DIAGRAM
FIXTURE
GROUND
WHITE
BLACK
GREEN/GROUND
WHITE
BLACK
Power supply wires
(14x14 Lumasquare pictured)
