Hubbell Geyser-R, Руководство по установке, Страница: 17 / 29

17 Version 2.9
Alternate Installation of the Geyser-R
Some tank manufacturers use a molded construction that does not allow for a dip tube to be inserted into the
bottom of the tank. In this case we recommend the water be heated by the
Geyser-R , pulled from a “Tee” on the
cold water supply at the top of the tank. The hot water that exits the Geyser-R is to be returned to the tank through
a “Tee” at the drain valve.
Note: The following installation requires the cold water inlet to the water tank to be cut and a tee or
connector assembly will need to be soldered in place.
Hubbell
recommends this installation be done by a
licensed plumber.
When the supplied dip tube isn’t used in the system, the following installation method is suggested :