Pub. 42004-658L2H
701-902 SmartSeries
®
Handset/Speaker Amplifier
Page 9 of 15
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-658L2H.docx
08/19
3.
Connect the assembly to the enclosure using a No. 10440-002 maintenance cable between
P1
on the
assembly and
J1
on the enclosure.
4.
Locate and adjust the control on the appropriate PCBA.
5.
When finished with the adjustment:
1.
Disconnect the 10440-002 maintenance cable.
2.
Insert the assembly into the enclosure.
3.
Tighten the four screws.
Operation
Operation of this unit is dependent on the system type where it is installed. The amplifier acts as a
standard Page/Party amplifier with ALS functionality when installed in a No 700 series enclosure in a
Page/Party system. All optional functions are available when installed in a SmartSeries enclosure in an
ADVANCE system.
Page/Party Operation
Page Announcement
To make a page announcement:
1.
Lift the handset from the cradle.
2.
Select an available party line using the five-position rotary selector switch if party-line conversation
is desired.
3.
Press the handset pressbar.
4.
Make the desired announcement or page the desired individual. Designate the party line for party-
line conversation as necessary.
N
OTE
:
The audio signals are superimposed when simultaneous pages are made.
5.
Release the handset pressbar.
6.
Replace the handset in the cradle when finished.
Party-Line Conversation
Perform the following steps to conduct a party-line conversation:
1.
Select the appropriate party line if using a multi-party enclosure.
2.
Lift the handset from the cradle.
3.
Conduct your conversation.
4.
Replace the handset in the cradle when the conversation is finished.
Party line communication is not broadcast over the system speakers. Other individuals can pick up a
handset and join the conversation at any time. Always return the handset to the cradle following a
page or a party line conversation.
