Hubbell Gai-Tronics Red Alert 300 Series, Руководство пользователя

Страница: 39 / 53

Pub. 42004-438M
300 Series Emergency Telephone Manual Page 37 of 50
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-438M.docx
04/19
Feature
Key
Sequence
Description Default
Secondary Dial
Tone Delay # 1 1 N N This feature is only used if you must dial 9 to access an
outside line. It determines the amount of time (00–15
seconds) the telephone waits for a second dial tone. The
first programming step indicated you must program
9*#
and the number you want the auto-dial to access. This
programming parameter allows you to choose the amount
of time the telephone waits after sending the 9 and
pausing before dialing the auto-dial number.
Example : To wait 10 seconds for the second dial tone,
enter # 1 1 1 0 .
02 (2 seconds)
Ring-down
Operation *1 This option clears the telephone number to prevent auto-
dialing when the button is pressed. After the button is
pressed, the ring-down system must detect loop current
and ring-down to the appropriate telephone. None
Ring-down Operation
Ring-down operation enables the telephone to go off-hook when the
HELP
push button is pressed. The
ring-down system must detect loop current and ring-down to the appropriate telephone.
Password Protection
The password protection feature allows changing the four-digit password required to program the
emergency telephone. Each telephone is password protected to maintain the integrity of programmed
information and should not be disabled.
The password is required to enter the programming mode when programming the telephone locally or
from a remote location. Jumper
J9 must be in the EN position to enable the password protection feature.
Complete the key sequence to change the four-digit password.
Table 5. Password Configuration
Feature
Key
Sequence
Description Default
Password
Protection # 1 4 N N N N A four-digit password must be supplied to remotely
program the telephone. If you change the password and
cannot enter programming mode, see the Password
Disabled Programming section.
Example : To program the password
1234
, enter # 1 4 1
2 3 4 .
2468