Pub. 42004-308H
234WM-202 RED ALERT
®
Elite Wall-Mount Communication Station
Page 5 of 10
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-308H.docx
08/19
No. 84503-30x Panel Light Installation
1.
Align the station panel light assembly inside the station (see Figure 5).
2.
Model 84503-301:
Extend the black (hot), the white (neutral) and the green (ground) wires to the
base of the station (these wires will be connected later, along with the strobe wires to the incoming
power wires in accordance with applicable electrical codes).
Model 84503-302:
Extend the black (−) and the white (+) wires to the base of the station (these wires
will be connected later, along with the strobe wires to the incoming power wires in accordance with
applicable electrical codes).
3.
Apply a small amount of clear RTV silicone sealant or equivalent to the threads of each panel light
screw to reduce the possibility of rust forming in the screw threads.
4.
Secure the panel light assembly to the station with the two mounting screws.
Figure 5. Station Panel Light Assembly