Hubbell & VC7FT-SP, Руководство по эксплуатации для владельца

Страница: 3 / 29

ANDERSON
®
Products
VC6FT-SP, VC63-SP,
VC7-SP, & VC7FT-SP
WARNING
Read and understand all of the instructions
and safety information in this manual
before operating or servicing this tool.
Failure to observe this warning can result
in severe injury or death.
WARNING
Electric shock hazard:
This tool is not insulated. When using this
unit near energized electrical lines use
proper personal protective equipment.
Failure to observe this warning can result in
severe injury or death.
WARNING
Wear eye protection when operating or
servicing this tool.
Failure to wear eye protection can result in
serious eye injury from flying debris or
hydraulic oil.
WARNING
Skin injection hazard:
Oil under pressure easily punctures skin
causing serious injury, gangrene or death.
If you are injured by escaping oil, seek
medical attention immediately.
Do not use hands to check for leaks.
Depressurize the hydraulic system
before servicing.
WARNING
• Keep hands away from the crimping tool
head when crimping.
Failure to observe these warnings can result
in severe injury or death.
SAFETY SYMBOLS & INFORMATION
SAFETY*
ALERT
SYMBOL
This symbol is used to call your attention to hazards or
unsafe practices which could result in any injury
or property damage. The signal word, defined below,
indicates the severity of the hazard. The message after
the signal word provides information for preventing or
avoiding the hazard.
DANGER
Immediate hazards which, if not avoided, WILL result in
severe injury or death.
WARNING
Hazards which, if not avoided, COULD result in severe
injury or death.
CAUTION
Hazards or unsafe practices which, if not avoided, MAY
result in injury or property damage.
WARNING
An incomplete crimp can cause a fire.

Use proper connector and cable combinations. Improper
combinations can result in an incomplete crimp.

The relief valve will sound to indicate a completed crimp.
If you do not hear the sound of the relief valve, the crimp
is not complete.
Failure to observe these warnings can result in severe injury
or death.
WARNING
Inspect tool before use. Replace any worn or damaged parts.
A damaged or improperly assembled tool can break and
strike nearby personnel.
Failure to observe this warning can result in severe injury
or death.
CAUTION

Protect the crimping tool from rain and moisture. Water will
damage the crimping tool and battery.

Use this tool for the manufacturer’s intended purpose only.
Failure to observe these precautions can result in injury or
property damage.
*
Reference ANSI Z535.4 latest rev. and color chart
Hubbell Power Systems 2 www.hubbellpowersystems.com