litecontrol.com
DO NOT MODIFY OR ALTER THIS PRODUCT IN ANY WAY, OR INSTALL IN ANY FASHION WHICH IS CONTRARY TO THE INSTRUCTIONS CONTAINED HEREIN.
IF YOU HAVE ANY QUESTIONS REGARDING THIS PRODUCT OR THE INSTALLATION OF IT, PLEASE CALL LITECONTROL ENGINEERING AT 781-294-0100.
DRAWING: 510641
REV / DATE: 0 / 1/16/2019
INSTALLATION INSTRUCTIONS
FIXTURE SERIES: 67L
MOUNTING TYPE: AIRCRAFT CABLES
PAGE: 2 OF 3
REMOVE LENS, REFERRING TO PAGE 3. LOCATE AIRCRAFT CABLES ALONG
STRAIGHT LINE IN CEILING PER DIMENSIONS SHOWN ON PAGE 1. REFER TO
CABLE INSTRUCTION SHEET 510541 FOR ATTACHMENT TO CEILING.
INSERT FLAT STRAP INTO
CHANNEL IN HOUSING
(MARKED IN BLUE). INSERT
CABLE GRIPPER THROUGH
HOUSING AND THREAD INTO
FLAT STRAP. REPEAT AT EACH
CABLE LOCATION.
AT END OF FIXTURE, INSERT
FLAT STRAP COMPLETELY
INTO HOUSING SUCH THAT
CABLE GRIPPER IS THREADED
INTO HOLE A. AT FIXTURE
JOINT, INSERT FLAT STRAP
PARTIALLY SUCH THAT HOLE B
IS USED.
RAISE FIXTURE (1ST FIXTURE OF ROW) UP TO
CEILING. ATTACH TO AIRCRAFT CABLE
REMOVE 5/8" PLUG BUTTON AT FEED LOCATION.
INSERT UNIVERSAL BUSHING INTO FEED HOLE
AND ROUTE FEED CORD THROUGH BUSHING
INTO FIXTURE WIREWAY. MAKE ELECTRICAL
CONNECTIONS.
RAISE NEXT FIXTURE IN ROW; ATTACH TO AIRCRAFT
CABLE IN CEILING. ROUTE WIRING THROUGH FIXTURE
JOINT AS SHOWN. INSERT PROTRUDING FLAT STRAP OF
PREVIOUS FIXTURE INTO CHANNEL OF NEW FIXTURE.
SECURE BY INSERTING 1/4-20 MACHINE SCREW
THROUGH HOUSING TOP AND FLAT STRAP.
SECURE JOINT USING (2) 8-32 MACHINE SCREWS AND
NUTS. DO NOT TIGHTEN UNTIL FIXTURES ARE ALIGNED;
LEVEL BY SLIDING CABLE GRIPPERS UP/DOWN. REPEAT
STEPS 3-4 FOR EACH ADDITIONAL FIXTURE IN ROW.
IF INSTALLING INDIVIDUAL FIXTURE: LEVEL
FIXTURE BY SLIDING CABLE GRIPPERS UP/DOWN.
SKIP TO STEP 5.
ATTACH END CAP AT BOTH ENDS OF FIXTURE OR ROW OF
FIXTURES USING (2) #8 X 1/4" LONG SHEET METAL SCREWS.
ENSURE END CAP IS FLUSH WITH HOUSING WALLS.
CLEAN FIXTURE EXTERIORS WITH GENERAL WINDOW
CLEANER. REATTACH LENS PER PAGE 3.
1
2
3
4
5
B
A
FLAT
STRAP
CABLE GRIPPER
BUSHING
5/8" FEED
HOLE (PLUG
REMOVED)
FEED
CORD
FLAT
STRAP
1/4-20 MS
8-32 MS
NUT
(LED REFLECTOR
MODULES HIDDEN
FOR CLARITY.)
END
CAP
#8 SMS
