27
©Hubbell Incorporated | hubbellpowersystems.com
TD09232E
Reassembly Instructions
To reassemble, follow these instructions in the reverse manner replacing parts in the same position as
noted when removed (with all models, ensure the welded side of the hoist chain is always facing away from
chain socket). It is important that the hoist be inspected, cleaned, and relubricated periodically depending
on working conditions.
Testing
After assembly, the hoist must be checked for proper operation and load tested.
Suspend the hoist from a support that can hold the test loads. With a load of 100 lbs on the hoist, carefully raise
and lower the load. The handle should be operated to rotate the shaft at least one complete revolution, (three full
chain links) in one tooth increments to ensure all teeth are tested.
A load equal to the rating of the hoist should then be raised and lowered in a similar manner. Attention to the
operation of all controls and the action of the hoist during testing is essential to make sure the hoist is safe to
return to duty. If the hoist passes the above tests, the hoist may be returned to service.
Refer any questions about the use, application, testing, or repair parts of this hoist to:
Hubbell / CHANCE, 210 N. Allen St., Centralia, MO 65240
Phone: +1 573-682-5521
