40148
Assembly & Installation Instructions
B380
Edge Outdoor Sconces 302560 & 302563
MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING
CASTLETON, VERMONT USA | HUBBARDTONFORGE.COM
Page 3 of 4
H
I
CAUTION:
FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*
Caution:
Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
Please Note: After installation extra hardware and accessories are possible; our kits are used on multiple products.
To Install Glass
(Figures 1 & 2)
1. Carefully unpack the fixture and glass from the carton.
2. Glass (J) should be installed in fixture (A) prior to installing
fixture to the wall.
3. Slide glass (J) into fixture (A) on an angle as seen in Figure 1.
Align and insert glass (J) into glass bracket (K).
4. Center glass (J) in fixture (A) (Figure 2) and secure with nylon
tip set screw (L). Tighten until snug against glass.
5. Follow steps on follow page to install fixture (A) to wall.
J
K
A
L
(Figure 1)
(Figure 2)
J
A
L
