19
Shortcut key setting:
Impact direction setting can be changed by press
【
DIRECTION
】
function
key.
Hardness scale setting can be changed by press
【
SCALE
】
function key.
Whenever press the key once, a circulating conversion among all
hardness scales that available to current material and impact device will
be performed. The hardness scale will be changed into Leeb hardness if
the current setting is strength measurement.
Material setting can be changed by press
【
MATERIAL
】
key. Whenever
press the key once, the circulating conversion among all material setting
will be performed, and hardness scale will be changed into Leeb
hardness, therefore, material should be set firstly when measuring, then
hardness scale should be set.
Note: what is called “conversion” refers to the corresponding
relationship of Leeb Hardness and other hardness for a certain
material, which established on basis of abundant tests. According to
the conversion relationship, the Leeb hardness value which measured
will be changed into other hardness scale value automatically via
calculating by hardness tester.
