9
The resistance test is similar to the single-phase capacitance test, so the introduction will
not be repeated
。
5
、
Other operations
[System Settings] You can set the time and other operations, just click the corresponding
icon button in the "Main Interface", it's very simple. The interface is as follows
：
Figure
（
9
）
[Factory Setting] The "Factory Setting" icon function button on the main interface is the
parameter setting during factory calibration. It is recommended that customers not change
the setting data, otherwise the test data will be inaccurate. If you need to change it again,
it must be carried out under the guidance of our company's technicians, and the set value
before the change must be recorded first, so that the initial value can be restored when the
setting fails.
[Data Processing] If you want to query the stored records, you can click the "Data
Processing" icon button in the main menu to enter the "Data Processing" interface, and
click the icon to operate.
6
、
The meaning of each symbol in the test data
：
⑴
, I: the effective value of the current of the capacitor (reactor) under test, the unit is A
