Huazheng HZ-662 Скачать руководство пользователя страница 3

Страница: 3 / 19

I.Overview

HZ-662 petroleum product distillation tester is designed and manufactured according to GB /

T6536-97 test method. Suitable for natural gasoline (stable light hydrocarbons), automotive

gasoline, aviation gasoline, jet fuel, special boiling point solvents, naphtha, kerosene, diesel, gas

oil, and similar petroleum products.

II.Technical Parameters

1. Power supply: AC220V ± 10% 60Hz

2. Heating power: 2KW

3. Refrigeration power: 0.5KW

4. Steam temperature measurement range: 0

℃

~ 400

℃

5. Electric furnace temperature measurement range: 0

℃

~ 500

℃

6. Refrigeration temperature range: 0

℃

~ 100

℃

7. Refrigeration control accuracy: ± 1

℃

8. Temperature measurement accuracy: ± 0.1

℃

9. Volume accuracy: ± 0.1ml

10. Fire alarm system: nitrogen fire

III.Structure and principle

The petroleum product distillation tester is composed of an automatic bath temperature

control system, an automatic distillation temperature control system, a refrigeration system, an

automatic liquid level automatic tracking system, and a safety protection system. The instrument

adopts the whole machine multi-thread operation control, which makes the instrument realize the

operation, control, calculation and display automation, which greatly improves the measurement

intelligence and automation. The instrument adopts the fuzzy temperature control principle, and

the Freon compressor is used to control the temperature of the refrigeration equipment, which can

accurately and precisely control the temperature of the condenser tube and the receiving chamber.

The temperature measurement system uses high-precision thermal resistance to accurately

measure the steam temperature. The instrument adopts imported high-precision liquid level

identification system, which can accurately measure the distillation volume, and the measurement

Содержание HZ-662




















Результаты поиска

Содержание HZ-662

Отзывы:

Похожие инструкции для HZ-662

Бренды по названию

Популярные бренды

Huazheng HZ-662, Быстрый старт

Результаты поиска

Содержание HZ-662

Отзывы:

Похожие инструкции для HZ-662

Бренды по названию

Популярные бренды