4
2.Press the data test to enter the following interface, as shown in Figure 2
Figure 2
Click
and the current will cycle between AUTO, 1A, 3A, 5A, 10A;
2. After the current is selected, click to start the test, it will display "Charging, please wait"
to enter the test state, a few seconds later, the test result will be displayed, as shown in
Figure 3.
Figure 3
After the test result is displayed, click local storage to save the test result, or click U disk to
store and print; click Exit to exit the test interface;
3. Click Data Management in Figure 1 to enter the data query interface, as shown in
Figure 4: