-14-
stored data includes maximum, minimum and average value. And then press
button to remove lock.
As shown in the left figure below: the lock measurement data is 5.1Ω, as
the 19th group of data storage.
11
．
Data Reading/Deletion
Startup or after measurement, press
button for a longer time (over
3 seconds) to enter data reading, press
or
button to select reading
data group number by step value 1, press
or
button constantly to
select reading data group number by step value 10, press
button to read
the maximum, minimum and average value of this group of data, and then
press
button to exit from reading.
On reading if there is no storage data, LCD will display “
- - - -
”, see the
above right figure.
Under data reading status, press
button to enter data deletion, press
or
to select “
no
” or “
YES
”, selecting
“
no
” and then pressing “
MEM
”
button for not deleting return data reading status, selecting “
YES
” and then
pressing “
MEM
” button for deleting stored data and it will show as above right
figure after deletion.
12
．
Data Upload
Make good connection of company with RS232 communication wire of
the Tester, switch on the Tester and run monitoring software, and if the
software displays that interface is open and the connection is successful,
then it can read the stored historical data, upload to company and preserve.
Monitoring software
has the function of online real-time monitoring
and historical inquiry, dynamic display, with the maximum, minimum, and
average value indication, with alarm value settings and alarm indicator, and
the function of historical data access, reading, preserve, print and other
functions.
