HUAYUAN LGK-240P, Инструкция по эксплуатации

Страница: 27 / 49


Never dip the electrode in water for cooling.

Never touch electric components of two welding machines at the same time,
because this voltage is supposed to be two times of welding voltage while the
grounding mode is not clear.

While working high above the ground or other places having the risk of falling,
please be sure to wear safety belt to avoid losing balance caused by electric
shock.

2 Arc
：
Use an arc welding mask to protect your eyes and skin
from sparks and the rays of the arc, pay special attention to the
filter glass, which must be conformable to the national
standard.

Use clothing made from durable flame-resistant material or sailcloth to protect
your skin from hurting by the arc rays.

Remind other nearby personnel before working lest arc rays hurt them by
accident.

3 Fumes and Gases
：
Welding may produce fumes and gases
hazardous to health. Avoid breathing these fumes and gases.
While working in limited room, use enough ventilation and/or
exhaust to keep fumes and gases away from the breathing zone,
or use the respirator. Do not weld at the same time when using
of degreasing, cleaning or spraying operations. The heat and
rays of the arc can react with these gases to form phosgene, a
highly toxic gas,

Some protective gases used in welding might displace the oxygen in the air, and
can lead to hurt or even death.

Read and understand the manufacturer’s instructions for this equipment, and
validate the health certification of consumptive materials, make sure they are
innocuous.