Huawei WS325 Скачать руководство пользователя

Страница: 10 / 74

WS325 300Mbps Wireless Router

User Guide

1 Warnings and Precautions

Issue 01 (2012-10-26)

1-5

Slovenščina:

Huawei Technologies Co., Ltd. izjavlja, da je ta naprava v skladu z

bistvenimi zahtevami in dru

gimi ustreznimi določbami Direktive 1999/5/ES.

Español (Europeo) :

Con el presente documento, Huawei Technologies Co., Ltd.

declara que este dispositivo cumple con los requisitos esenciales y con las demás

disposiciones correspondientes de la Directiva 1999/5/CE.

Svenska:

Huawei Technologies Co., Ltd. förklarar härmed att denna produkt

överensstämmer med de grundläggande kraven och andra relevanta föreskrifter i direktiv

1999/5/EG.
For the declaration of conformity, visit the Web site

www.huaweidevice.com/certification.

Notice: Observe the national local regulations in the location where the device is to be

used. This device may be restricted for use in some or all member states of the European

Union (EU).
Notice: This device can be operated in all European countries.

Norway:

This subsection does not apply for the geographical area within a radius of 20

km from the centre of Ny-Ålesund.

Federal Communications Commission (FCC) Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.
This device should be installed and operated with a minimum distance of 20 cm between

the antenna and all persons.
Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by

Huawei Technologies Co., Ltd. may void the FCC authorization to operate this device.

Содержание WS325











































































Результаты поиска

Содержание WS325

Отзывы:

Похожие инструкции для WS325

Бренды по названию

Популярные бренды

Huawei WS325, Руководство пользователя

Результаты поиска

Содержание WS325

Отзывы:

Похожие инструкции для WS325

Бренды по названию

Популярные бренды