1.5 Charging your watch
Charging
1.
Connect the USB Type-C port and power adapter and then plug in the power adapter.
2.
Rest your watch on top of the charging cradle, ensuring that the contacts on your watch
and the cradle are aligned. Wait until the charging icon appears on your watch screen.
3.
When your watch is fully charged, 100% will be displayed on the watch screen and the
charging will stop automatically. If the battery level is below 100% and the charger is
still connected to the phone, the charging will start automatically.
l
Use the dedicated charging cable, charging cradle, rated output voltage of 5 V, and rated output
current of 1 A or higher to charge your watch.
l
It is recommended that you lift the charging cradle to attach it to your watch. Ensure that the side of
your watch with buttons is aligned with the charging port of the cradle. After the cradle and watch
are connected properly, check to see if the charging icon is displayed. If you cannot see the charging
icon, you may need to slightly adjust the position of the cradle until contact is established and the
charging icon appears.
l
Your watch will automatically power off when its battery level is too low. The
icon will be
displayed during charging. After it is charged for a while, your watch will automatically power on.
Charging time
Your watch will be fully charged within two hours. When the charging indicator displays
100%, the watch is fully charged. Disconnect your watch from the power adapter once it is
fully charged.
HUAWEI WATCH GT2
User Guide-(01,en-us)
1 Getting started
Issue 01 (2019-11-20)
Copyright © Huawei Technologies Co., Ltd.
9
