Huawei WA603DE, Руководство по настройке

Страница: 20 / 37

WA603DE & WA653DE
Fat AP Configuration Guide
3 Service Configuration
Issue 02 (2012-04-19) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
15
2.
Set the traffic rate for the uplink and downlink. Ensure that the traffic rates in the uplink and
downlink are limited or not limited at the same time. By default, the traffic rates in the uplink
and downlink are not limited.
Table 3-4 Description of transmission rate parameters
Parameter Description
Per Station
Traffic Rate The traffic rates of all stations on the WLAN are limited by this
parameter.
Downlink Traffic rate policy in the downlink, used to limit the traffic rate of the
data transmitted from an AP to a STA.
Uplink Traffic rate policy in the uplink, used to limit the traffic rate of the data
transmitted from a STA to an AP.
Class Types of traffic, namely, voice, video, background, and others. The
traffic type determines the transmission priority.
Voice Voice traffic, which is sensitive to data delay and requires the highest
priority.
Video Video traffic, which is less sensitive to data delay and requires the
second highest priority.
Best-Effort Traffic excluding the voice, video, and background data, which is less
sensitive to data delay.
Background Background traffic, which provides the basic network status data. It is
least sensitive to data delay and requires lowest priority.
Rate Bandwidth rate. The actual cell rate may exceed the rate in the Rate
column but does not exceed the rate in the Celling column.
Celling Cell rate. This parameter specifies the cell rate to ensure that the cells of
the higher priority are transmitted first, or to limit the transmission rate
in a good environment to ensure the basic transmission rate in a poor
network environment.
Buffer Maximum number of packets waiting to be transmitted. When the
number of packets waiting to be transmitted exceeds this value, the
extra packets are discarded. This parameter helps prevent the burst of
data to ensure that the transmission rate is within the permitted range.
3.
Click Update Settings to save the settings.
4.
Click Go back to Wireless Configuration .
----End
3.3.3 Configuring Access Control Parameters
To limit stations connected to the WLAN, perform the following operations:
1.
Click Edit Settings in the Access Control field, as shown in Figure 3-7 .