B
Upgrading the Camera Software
Step 1
Connect the VPT300, TE endpoint, and computer, and ensure that they can
communicate with each other, as shown in
.
Figure B-1
VPT300 connection diagram
Step 2
Log in to the web interface of the TE endpoint. For details, see
the Web Interface of an Endpoint
.
Step 3
Choose
Device Control
>
Device Control
and click the
Camera parameters
adjustment
tab.
Step 4
In the
VPT300 parameters adjustment
area, set the camera IP address, subnet
mask, gateway address, and upgrade password, as shown in
.
VPT300 Intelligent Camera
Installation and Commissioning Guide
（
Single-
VPT300
）
B Upgrading the Camera Software
Issue 04 (2020-02-11)
Copyright © Huawei Technologies Co., Ltd.
35
