manualshive.com logo in svg

Huawei V100R005, Руководство пользователя, Страница: 22 / 294

Поделиться
Скачать
Huawei V100R005 Скачать руководство пользователя страница 22

Indicator

State Description

Transmission rate
indicator

l

Steady green: The data transmission rate is
10 Gbit/s.

l

Steady yellow: The data transmission rate is
lower than 10 Gbit/s.

l

Off: The network port is not connected.

GE
electrical
port

Connection status
indicator

l

Steady green: The network port is properly
connected.

l

Off: The network port is not connected.

Data transmission status
indicator

l

Blinking yellow: Data is being transmitted.

l

Off: No data is being transmitted.

UID indicator

The UID indicator helps identify and locate a
server. You can turn on or off the UID indicator
by pressing the UID button or remotely running
a command on the iBMC CLI.

l

Steady blue/Blinking blue: The server is
being located.

l

Off: The server is not being located.

PSU indicator

l

Steady green: The power input and output
are normal.

l

Steady orange: The input is normal, but no
power output is supplied due to overheat
protection, overcurrent protection, short
circuit protection, output overvoltage
protection, or some component failures.

l

Blinking green at 1 Hz:

–

The input is normal, the server is standby,
and the PSU is in MV6 mode. (The
output voltage is 6.7 V.)

–

The input is overvoltage or undervoltage.

–

The PSU is in deep hibernation mode.

l

Blinking green at 4 Hz: under online
firmware upgrade.

l

Off: No AC power is supplied.

 

2.5 Flexible NIC

Supported flexible NICs include:

l

SM211 (chip: i350) with two GE electrical ports

l

SM210 (chip: 5719)/SM212 (chip: i350) with four GE electrical ports

l

SM233 (chip: X540) with two 10GE electrical ports

2288H V5 Server
User Guide

2 Components

Issue 04 (2018-09-04)

Copyright © Huawei Technologies Co., Ltd.

13

Содержание V100R005







































































































































































































































































































Отзывы:

Нет отзывов