manualshive.com logo in svg

Huawei TaiShan 2280 V2, Руководство пользователя

Поделиться
Скачать
Huawei TaiShan 2280 V2 Скачать руководство пользователя страница 73

Figure 4-11

 Connecting a serial cable

----End

4.5.6 Connecting Power Cables

Power cables are used only for dedicated servers. Do not use them for other devices.

Step 1

Connecting cables to a PSU. For details, see 

3.5 Connecting Cables to a PSU

.

Step 2

Insert the other end of the power cable into the AC power socket on the cabinet. The AC
power socket is located horizontally at the rear of the cabinet. Select a jack on the power
socket for connection.

Step 3

Bind the power cable to the CMA using cable ties.

----End

4.5.7 Verifying Cable Connections

Before verifying cable connections, check that the power is cut off. Otherwise, any incorrect
connection or loose connection may cause human injury or device damage.

Check cable connections against 

Table 4-3

.

Table 4-3

 Cable connection checklist

Item

Description

Power cable

Power cables are correctly connected to the rear of the chassis.

Network cable

Network cables are connected correctly to the management port or
service ports on the rear panel of the chassis.

Ground cable

The TaiShan 2280 V2 server does not provide a separate ground port.
It is grounded through the ground cable of a power cable. Ensure that
the power cables of the PSUs are in good contact.

 

TaiShan 2280 V2 Server
User Guide

4 Setup

Issue 01 (2019-07-01)

Copyright © Huawei Technologies Co., Ltd.

65

Содержание TaiShan 2280 V2


















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды