Huawei SUN2000-10KTL-M0 Скачать руководство пользователя страница 4

Страница: 4 / 112

Symbol

Description

Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,

performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to

personal injury.

Supplements the important information in the main text.
NOTE is used to address information not related to

personal injury, equipment damage, and environment

deterioration.

Change History

Changes between document issues are cumulative. The latest document issue

contains all updates made in previous issues.

Issue 06 (2019-07-02)

Updated

A Grid Codes

Issue 05 (2019-11-12)

●

Updated the appearance and installation diagrams because the structure of

the mounting bracket at the lower part of the inverter rear panel is changed.

●

Updated the screenshots of the FusionSolar app.

●

Updated

E AFCI

Issue 04 (2019-10-18)

●

Updated

5.1 Preparing for Installation

and changed the WLAN Smart

Dongle to the WLAN-FE Smart Dongle.

●

Updated

5.5 (Optional) Installing the Smart Dongle

and added the

installation method of the WLAN-FE Smart Dongle.

●

Updated

5.6 (Optional) Installing the Signal Cable

. The Dongle signal cable

supports the cascading of multiple inverters.

●

Updated

5.6.2 Connecting the RS485 Communications Cable (Smart Power

Sensor)

and added the three-phase three-wire wiring diagram.

●

Updated

6.2 Powering On the System

and added indicator description about

the WLAN-FE Smart Dongle and 4G Smart Dongle.

●

Updated

6.3 Commissioning

, modified the scenario names, FusionSolar app

download methods, and app screenshots, and added version description about

FusionSolar app supported by the WLAN-FE Smart Dongle.

●

Updated

C Setting Export Limitation Parameters

and modified the

screenshots and parameter description.

SUN2000-(12KTL, 15KTL, 17KTL, 20KTL)-M0

User Manual

About This Document

Issue 06 (2020-07-02)

iii

Содержание SUN2000-10KTL-M0

















































































































Результаты поиска

Содержание SUN2000-10KTL-M0

Отзывы:

Бренды по названию

Популярные бренды

Huawei SUN2000-10KTL-M0, Руководство пользователя

Результаты поиска

Содержание SUN2000-10KTL-M0

Отзывы:

Бренды по названию

Популярные бренды