Huawei SMU01C Скачать руководство пользователя страница 45

Страница: 45 / 54

SMU01C
User Manual

9 Alarm Management

Issue 03 (2015-01-05)

Huawei Proprietary and Confidential



The battery loop is faulty.

Measures

Check the battery circuit breaker. If the battery circuit breaker is OFF, rectify the battery
fault and switch on the battery circuit breaker.

Check the battery cables and connectors, and replace faulty ones.

9.5.14 Rect Fault

Possible Causes



A rectifier is faulty.

Measures

If the Fault indicator on a rectifier is steady red, reset the rectifiers one by one, if the
alarm persists, replace the rectifier.

9.5.15 Singl-Rect Fault

Possible Causes

Only one rectifier is faulty, and redundant rectifiers are provided.

Measures

If the Fault indicator on a rectifier is steady red,

reset the rectifiers one by one, if the alarm

persists, replace the rectifier.

9.5.16 Multi-Rect Fault

Possible Causes

Two or more than two rectifiers are faulty.

Measures

If the Fault indicator on a rectifier is steady red, reset the rectifiers one by one, if the alarm
persists, replace the rectifier.

9.5.17 Rect Comm Fault

Possible Causes



The signal cable to the rectifier is not connected properly.



The rectifier is removed.



The rectifier is in poor contact.

Содержание SMU01C























































Результаты поиска

Содержание SMU01C

Отзывы:

Похожие инструкции для SMU01C

Бренды по названию

Популярные бренды

Huawei SMU01C, Руководство пользователя

Результаты поиска

Содержание SMU01C

Отзывы:

Похожие инструкции для SMU01C

Бренды по названию

Популярные бренды