Huawei SmartLogger2000 series Скачать руководство пользователя страница 82

Страница: 82 / 230

SmartLogger2000
User Manual

5 System Operation

Issue 04 (2018-04-10)

Huawei Proprietary and Confidential

System Operation

5.1 Checking Before Power-On

To ensure that the SmartLogger can work properly after power-on, check the items listed in

Table 5-1

before powering on the SmartLogger.

Table 5-1

Items to be checked for the SmartLogger before power-on

No.

Check That

Check Result

The SmartLogger is installed correctly and reliably.

□ Passed □ Failed

Ground cables of the SmartLogger are connected to
ground points securely and reliably.

□ Passed □ Failed

The cables between the SmartLogger and other devices
are connected securely and reliably.

□ Passed □ Failed

The RS485 communications cable is connected securely
and reliably.

□ Passed □ Failed

The AC power cable is securely and reliably connected to
the SmartLogger when the AC power cable is used for
communication.

□ Passed □ Failed

Ports that are not used (such as RF1, RF2, Ethernet
optical port, and Ethernet port) are protected by dustproof
plugs.

□ Passed □ Failed

Routing for the power cable and signal cable meets the
requirements for routing strong-current and weak-current
cables and complies with the cable routing plan.

□ Passed □ Failed

Cables are bound neatly, and cable ties are secured evenly
and properly in the same direction.

□ Passed □ Failed

There is no unnecessary adhesive tape or cable tie on
cables.

□ Passed □ Failed

Содержание SmartLogger2000 series







































































































































































































































Результаты поиска

Содержание SmartLogger2000 series

Отзывы:

Huawei SmartLogger2000 series, Руководство пользователя, Страница: 82 / 230

Результаты поиска

Содержание SmartLogger2000 series

Отзывы: