Huawei SmartAX MA5600T, Руководство по настройке

Страница: 861 / 1979

Items Management
service Internet
access service VoIP service IPTV service
Rate limit on
OLT
downstream No rate limit Configure rate
limit by a traffic
profile as
required.
[Remark 2] No rate limit No rate limit
Rate limit on
ONU upstream
port Set ONU port rate limit or xDSL line rate limit as required. [Remark 2]
Rate limit on
ONU
downstream
port Set ONU port rate limit or xDSL line rate limit as required. [Remark 2]
Remark 1: GEM port value depends on the planning of the service provider, but in principle,
use different GEM ports for different services.
Remark 2: Table 11-4 shows the reference service bandwidth of each service for each user.
Table 11-4 Reference Service Bandwidth of Each service for Each User
Service
Type Upstrea
m
Bandwi
dth Downstream
Bandwidth Bandwidth Description
Internet
access
service Determi
ned
based on
the tariff
package. Determined based on
the tariff package. Available bandwidth of Internet access
service = Committed bandwidth of the tariff
package - VoIP bandwidth - IPTV bandwidth
VoIP
service 200 kbit/
s 200 kbit/s The upstream bandwidth and the downstream
bandwidth of VoIP service are symmetrical.
The actual bandwidth varies with the coding
format. This bandwidth is calculated for two
POTS ports.
IPTV
service
(commo
n
program
) / 2.5 Mbit/schannel IPTV service mainly occupies the
downstream bandwidth. The actual
bandwidth depends on the coding format, the
picture in picture information, 10%
bandwidth burst traffic, and the number of
programs that can be concurrently watched
by one user (in the case of multi STBs access).
The upstream bandwidth is mainly used for
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
11 FTTB and FTTC Solution Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
836