1.4.1 Commissioning the Interconnection with the NMS
The MA5600T/MA5603T/MA5608T provides the function of interconnecting with the network
management system, with which the administrator can maintain and manage the MA5600T/
MA5603T/MA5608T through the NMS. This topic considers the iManager U2000 Network
Management System (hereinafter referred to as the U2000) as an example to describe how to
perform the interconnection commissioning between the U2000 and the MA5600T/MA5603T/
MA5608T in the inband mode and the outband mode. SNMPv3 has higher security than
SNMPv1 and SNMPv2c. Therefore, it is recommended.
1.4.1.1 Commissioning Outband Network Management (SNMP V1 and V2)
This topic describes how to implement the outband network management on the MA5600T/
MA5603T/MA5608T using the local maintenance Ethernet port (outband network management
port). This enables the U2000 to maintain the MA5600T/MA5603T/MA5608T using this
management channel. In the outband network management mode, a non-service channel is used
to transmit the management information. With the use of the non-service channel, the
management channel is separated from the service channel, which is more reliable than in the
inband network management mode.
Service Requirements
In the network as shown in
, the service requirements are as follows:
l
The MA5600T/MA5603T/MA5608T provides the outband network management channel
using the local maintenance Ethernet port.
l
A static route is used between the MA5600T/MA5603T/MA5608T and the U2000.
Figure 1-49
Example network for the outband network management
U2000
10.10.1.10/24
10.50.1.10/24
10.50.1.1/24
Router
Access node
shows the flowchart for commissioning the outband network management on the
device.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
136