background image

Number Indicator/

Button

Color

Description

6

MODE: mode
switch button

-

l

When you press this button once, the
service port indicators change to STCK
mode and show the stack ID of the local
switch.

l

When you press this button a second
time, the service port indicators change
to PoE mode and show the PoE status
of ports.

l

When you press this button a third time,
the STAT indicator turns green and the
service port indicators restore to the
default mode.

If you do not press the MODE button
within 45 seconds, the service port
indicators restore to the default mode. In
this case, the STAT indicator is steady
green, the PoE indicator is off, and the
STCK indicator is off or blinking green.

7

Service port
indicator

l

FE electrical
ports: The
ports are
numbered
from bottom
to top and left
to right,
starting with
1.

l

GE ports:
Each GE port
has an
indicator
above it.

Meanings of service port indicators vary in different modes.
For details, see 

Table 2-6

.

 

Table 2-6

 Description of service port indicators in different modes

Display Mode

Color

Description

Status

Off

No link has been established to the port or
the port has been shut down.

S2750 Series Ethernet Switches
Hardware Description

2 Chassis

Issue 04 (2014-03-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

16

Содержание S2750

























































Отзывы: