HUAWEI RP100-55T Room Presence
User Guide
12 Maintenance and Troubleshooting
Issue 01 (2013-12-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
77
Table 12-6
Audio function cannot work normally
Phenomenon
Troubleshooting
With image but no
sound
1.
Check whether the mute button is presses.
2.
Press VOL+/- to adjust the volume.
3.
Check whether the audio cable is properly connected.
Only
one
speaker
voiced
1.
Adjust the sound balance in Menu.
2.
Check whether only one channel is set in the PC sound control
panel.
3.
Check whether the audio cable is properly connected.
VGA output voiceless
Check whether earphone cable is connected to the external
equipment.
12.2.2 Web Interface
Table 12-7 describes the troubleshooting methods for problems arising on the web interface.
Table 12-7
Troubleshooting methods for the problems arising on the web interface
Problem
Possible Cause
Solution
A message
indicating that the
RP100-55T failed to
connect to the
Internet or failed to
download images is
displayed on the
web interface.
The latest patches of the
operating system or Internet
Explorer are not installed.
Install the latest patches of the
operating system and Internet
Explorer.
The security level of Internet
Explorer is too high or the IP
address of the codec has not
been added to the list of
trusted sites.
From the Internet Explorer
menu bar, choose
Tools
>
Internet Options
.
On the
Security
tab, click
Trusted sites
. Then click
Sites
to display the
Trusted sites
dialog box.
In
Add this Web site to the
zone
, enter the IP address of
the codec, and then click
Add
.
Click
OK
to save the settings.
The button text of
the web interface is
not displayed
completely.
Internet Explorer is set to
ignore font styles specified on
Web pages. Therefore, the
font specified by the
RP100-55T is invalid and the
button text of the web
interface is not displayed
completely.
From the Internet Explorer
menu bar, choose
Tools
>
Internet Options
.
On the
General
tab, click
Accessibility
.
In the
Accessibility
dialog box,
clear all the check boxes.
Click
OK
to save the settings.