Huawei Quidway S8500 Series, Руководство по управлению

Страница: 104 / 1341

Command Manual – Port
Quidway S8500 Series Routing Switches
Chapter 3 POS Port Configuration Commands
Huawei Technologies Proprietary
3-11
Use the pos access vlan command to add the POS port into the designated VLAN.
Use the undo pos access vlan command to delete the POS port from the designated
VLAN.
Note that:
z
The VLAN added to the POS port must be existent and is configured with the
corresponding VLAN interface and IP address. In addition, it cannot be VLAN 1.
z
If there are ports of other types in this VLAN, then the POS port cannot be added
into this VLAN, and vice versa.
Example
# Add POS2/1/1 into VLAN3.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface pos2/1/1
[Quidway-Pos2/1/1] pos access vlan 3
3.1.12 ppp timer negotiate
Syntax
ppp timer negotiate seconds
undo ppp timer negotiate
View
POS port view
Parameter
seconds : Timeout time in seconds for PPP negotiation, in the range of 1 to 10
(seconds). By default, it is 3 seconds.
Description
Use the ppp timer negotiate command to set timeout time for PPP negotiation.
Use the undo ppp timer negotiate command to restore the default timeout time for
PPP negotiation.
Example
# Set the timeout time as 5 seconds.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface pos2/1/1
[Quidway-Pos2/1/1] ppp timer negotiate 5