Operation Manual – Information Center
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 1 Information Center
Huawei Technologies Proprietary
1-13
Operation
Command
Description
Set the format of
time stamp
info-center timestamp
{
log | trap
|
debugging
} {
boot
|
date
|
none
}
Optional
This is to set the time
stamp format for
log/debugging/trap
information output.
This determines how
the time stamp is
presented to users.
Note:
To view debugging information of specific modules, you need to set the information
type as
debug
in the
info-center source
command, and enable debugging on
corresponding modules with the
debugging
command as well.
1.2.7 Enabling Information Output to the SNMP
Table 1-12 lists the related configurations on the switch.
Table 1-12
Enable information output to the SNMP
Operation
Command
Description
Enter system view
system-view
—
Enable the
information center
info-center enable
Optional
By default, the information
center is enabled.
Enable information
output to the
SNMP
info-center snmp channel
{
channel
-
number |
channel
-
name
}
Required
By default, the switch outputs
trap information to SNMP
through channel 5.
Define an
information source
info
-
center source
{
modu
-
name
|
default
}
channel
{
channel
-
number |
channel
-
name
} [ {
log
|
trap
|
debug
} {
level
severity
|
state
state
} ]*
Required
Set the format of
time stamp
info-center timestamp
{
log
|
trap
|
debugging
}
{
boot
|
date
|
none
}
Optional
This is to set the time stamp
format for log/debugging/trap
information output.
This determines how the time
stamp is presented to users.
