Command Manual – IP Address and Confiugration
Quidway S3900 Series Ethernet Switches-Release
1510
Chapter 2 IP Performance Configuration Commands
2-3
Description
Use the
display fib ip-address
command to view the FIB entries matching the
destination IP address. Each line indicates an FIB entry. The information includes:
destination address/mask length, next hop, current flag, timestamp, and outbound
interface.
Example
# View the FIB entries whose destination addresses match 12.158.10.0 in the natural
mask range.
<Quidway>display fib 12.158.10.0
Route Entry Count: 1
Flag:
U:Usable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
R:Reject E:Equal cost multi-path L:Generated by ARP or ESIS
Destination/Mask Nexthop Flag TimeStamp Interface
12.158.10.0/24 12.158.10.1 U t[85391] Vlan-interface10
# Display the FIB entries whose destination addresses are in the range of
12.158.10.0/24 to 12.158.10.6/24.
<Quidway>display fib 12.158.10.0 255.255.255.0 12.158.10.6 255.255.255.0
Route Entry Count: 1
Flag:
U:Usable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
R:Reject E:Equal cost multi-path L:Generated by ARP or ESIS
Destination/Mask Nexthop Flag TimeStamp Interface
12.158.10.0/24 12.158.10.1 U t[85391] Vlan-interface10
For details about the displayed information, see Table 2-1.
2.1.3 display fib acl
Syntax
display fib acl
number
View
Any view
Parameter
number
: ACL in the number form, in the range of 2000 to 2999.