Command Manual - DLDP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 DLDP Configuration Commands
Huawei Technologies Proprietary
1-2
interface GigabitEthernet1/1/1
dldp port state : advertisement
dldp link state : up
The neighbor number of the port is 1.
neighbor mac address : 00e0-fc27-750d
neighbor port index : 98
neighbor state : two way
neighbor aged time : 24
1.1.2 dldp
Syntax
dldp
{
enable
|
disable
}
View
System view, Ethernet port view
Parameter
None
Description
In system view:
Use the
dldp enable
command to enable DLDP globally on all optical ports of the
switch.
Use the
dldp disable
command to disable DLDP globally on all optical ports of the
switch.
In Ethernet port view:
Use the
dldp enable
command to enable DLDP on the current port.
Use the
dldp disable
command to disable DLDP on the current port.
The commands can apply to a non-optical port as well as an optical port.
By default, DLDP is disabled.
Note:
When you use the
dldp enable/dldp disable
commands in system view to
enable/disable DLDP globally on all optical ports of the switch, these commands are
only valid for the existing optical ports on the device, however, they are not valid for
those added subsequently.
