manualshive.com logo in svg

Huawei Quidway S3300 Series, Описание аппаратуры

Поделиться
Скачать
Huawei Quidway S3300 Series Скачать руководство пользователя страница 61

Table 5-4

 describes the fan indicators.

Table 5-4

 Fan indicator description

Name

Color

Description

STATUS

Blinking green
(1 Hz)

The fan module is operating properly.

Blinking red (1
Hz)

The fan module is faulty.

 

5.3 Power Indicators

This section describes the power indicators.

Non-PoE Power Indicators

The non-PoE power indicators are displayed on the panel of the power supply unit through the
lamp guide. For the indicator description, see

NOTE

If a switch does not have a power supply unit, see section 

5.1 Indicators on the Front Panel

 for the PWR

indicator description.

AC PoE Power Indicators

Table 5-5

 describes the AC PoE power indicators.

Table 5-5

 Description of the AC PoE power indicators

Name

Status

Description

INPUT

Green

The input power is within
range.

Red

The input power is out of
range, for example:

l

Undervoltage

l

Overvoltage

Off

The power cable is loose or
no input AC power is
provided.

OUTPUT

Green

The AC output power is
within range.

Quidway S3300 Series Ethernet Switches
Hardware Description

5 List of Indicators

Issue 01 (2011-01-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

5-7

Содержание Quidway S3300 Series




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды