After the page setup has been made correctly, save it for future use. This page setup is only
necessary the first time you use the template to print the labels.
Requirements for Feeding the Printer
The label paper consists of two layers. No matter what model of printer you use, feed in the
labels one page at a time. To avoid jamming the labels, never use the auto-feed mode.
Requirements for the Printed Label
Make sure that the printed labels satisfy the following requirements:
l
All the printouts must be on the label, and nothing should be printed on the backing layer
of the label page.
l
Contents in the cells should be aligned in the center. In a single-line printout, the dividing
lines and the mark "To:" should not be covered by the printed characters.
l
When the cells are merged and the printouts are made in multiple lines, avoid covering the
mark "TO:" when printing the texts. Use the space bar to move the text to the next line.
D.1.4 Writing Labels
Writing Tools
To make sure the printouts are clear and legible, use the black markers instead of ball-point pens
to write the labels.
In special cases, black ball-pens are allowed, although not recommended. Compared with ball-
point pens, water-proof markers are better. When writing with a ball-point pen, do not leave the
oil on the label, which may contaminate the label and blur the words.
NOTE
The delivered marker has two nibs. Make sure to use the smaller nib to write the labels.
Font
For the sake of easy recognition and good appearance, the font in handwriting should be as close
to a standard typeface (such as Times New Roman) as possible.
shows the standard
typeface.
Table D-1
Standard typeface for handwriting
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
WThe characters should be clear, distinct, and tidy.
Writing direction: The direction is as shown in
HUAWEI NetEngine80E Router
Installation Guide
D Engineering Labels for Cables
Issue 02 (2011-09-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
134
