Huawei OptiX OSN 550 Скачать руководство пользователя страница 450 | Manualshive

Страница: 450 / 470

Huawei OptiX OSN 550 Скачать руководство пользователя страница 450

Ethernet Private Line

A type of Ethernet service that is provided with dedicated bandwidth and point-to-point
connections on an SDH, PDH, ATM, or MPLS server layer network.

Ethernet virtual
private LAN service

A type of Ethernet service provided by SDH, PDH, ATM, or MPLS networks. This
service is carried over a shared bridge and point-to-multipoint connections.

Ethernet virtual
private line

A type of Ethernet service provided by SDH, PDH, ATM, or MPLS networks. This
service is carried over a shared bridge and point-to-point connections.

ETSI

European Telecommunications Standards Institute

EVPL

Ethernet virtual private line

EVPLAN

Ethernet virtual private LAN service

Exercise Switching

An operation to check whether the protection switching protocol functions properly. The
protection switching is not really performed.

Exerciser - Ring

This command exercises ring protection switching of the requested channel without
completing the actual bridge and switch. The command is issued and the responses are
checked, but no working traffic is affected.

Extended ID

The number of the subnet that an NE belongs to, for identifying different network
segments in a WAN. The physical ID of an NE is comprised of the NE ID and extended
ID.

extra traffic

The traffic that is carried over the protection channels when that capacity is not used for
the protection of working traffic. Extra traffic is not protected.

A.7 F

Failure

If the fault persists long enough to consider the ability of an item with a required function
to be terminated. The item may be considered as having failed; a fault has now been
detected.

Fairness

A feature in which for any link specified in a ring network, the source node is provided
with certain bandwidth capacities if the data packets transmitted by the source node are
constrained by the fairness algorithm.

fairness algorithm

An algorithm designed to ensure the fair sharing of bandwidth among stations in the case
of congestion or overloading.

fault

A failure to implement the function while the specified operations are performed. A fault
does not involve the failure caused by preventive maintenance, insufficiency of external
resources or intentional settings.

FC

Fiber Channel

FD

frequency diversity

FDDI

fiber distributed data interface

FDI

Forward Defect Indicator

FE

Fast Ethernet

feature code

Code used to select/activate a service feature (for example, forwarding, using two or
three digit codes preceded by * or 11 or #, and which may precede subsequent digit
selection).

FEC

forwarding equivalence class

A Glossary and Acronyms

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

A-12

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2011-06-30)

«
...
448
449
450
451
452
...
»

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов