Huawei OptiX OSN 550 Скачать руководство пользователя страница 324 | Manualshive

Страница: 324 / 470

Huawei OptiX OSN 550 Скачать руководство пользователя страница 324

Before you delete an NE or a fiber/cable connection on the U2000, you need to delete the related
protection subnets.

5.5.2 Changing the Values of Protection Subnet Parameters

In the case of the SDH equipment, you can set the parameters of the MSP protection subnet by
using the protection subnet maintenance function.

5.5.1 Deleting Protection Subnets

Before you delete an NE or a fiber/cable connection on the U2000, you need to delete the related
protection subnets.

Prerequisite

l

You must be an NM user with "network maintainer" authority or higher.

l

If trails are configured on the protection subnet that you need to delete, delete the trails
first.

Procedure

Step 1

Choose

Service

>

SDH Protection Subnet

>

Manage SDH Protection Subnet

from the Main

Menu.

Step 2

Right-click the protection subnet to be deleted and choose

Delete from the NM

,

Delete from

the NE

, or

Delete All from the NM

from the short-cut menu.

NOTE

The methods of deleting a protection subnet are as follows:

l

Delete from the NM

: If

Delete from the NM

is selected, the relations between the protection subnet and

each logical system on the NE side are deleted so that the fibers can be deleted and reloading can be
performed. This command is not delivered to the NE and does not affect the services. The deleted protection
subnet can be located by using the search feature. The U2000 locates it according to the NE layer protection
information.

l

Delete from the NE

: If

Delete from the NE

is selected, the protection subnet, logical systems on the NE

side, and all the services on the protection subnet are deleted. The deleted protection subnet cannot be restored
and needs to be created again.

l

Delete All from the NM

: If

Delete All from the NM

is selected, the data of the protection subnet except

the fibers at the network layer is deleted. The deleted protection subnet can be located by using the search
feature. It is recommended that you do not select this option, because a large amount of data is deleted.

Step 3

Click

Yes

in the

Operation Prompt

dialog box indicating that the operation succeeded. Then,

the

Operation Result

dialog box is displayed.

NOTE

If

Delete from the NE

is selected, you need to confirm the operation again.

Step 4

Click

Close

.

----End

5.5.2 Changing the Values of Protection Subnet Parameters

In the case of the SDH equipment, you can set the parameters of the MSP protection subnet by
using the protection subnet maintenance function.

5 Modifying the Configuration Data

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

5-14

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2011-06-30)

«
...
322
323
324
325
326
...
»

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов