Huawei OptiX OSN 550 Скачать руководство пользователя страница 291 | Manualshive

Страница: 291 / 470

Huawei OptiX OSN 550 Скачать руководство пользователя страница 291

4.11.5 TAG Attributes

Tag attributes are important attributes that are used for configuring Ethernet services, including
the parameters such as the default VLAN ID, VLAN priority, ingress detection setting, and tag
ID.

lists the parameters that are used for configuring the tag attributes of an Ethernet

port.

Table 4-40

Parameters for configuring the tag attributes of an Ethernet port

Field

Value Range

Description

Port

PORTn

Specifies the PORT. The letter n
indicates the number of the port.

TAG

Access, Tag Aware, Hybrid
Default value: Tag Aware

The

Tag Identifier

parameter

indicates that the Ethernet port
supports IEEE 802.1Q Ethernet
packets that contain VLAN tags.
You can set three attributes to
differentiate the packets from each
other so that these packets can be
transmitted efficiently.
You can click

to display

the detailed information.

Default VLAN ID 1-4095

Default value: 1

The

Default VLAN ID (Ethernet

Port Attribute)

parameter

specifies the default VLAN ID of
a port.
You can click

7.16 Default VLAN

ID (Ethernet Port Attribute)

to

display the detailed information.

VLAN Priority

0-7
Default value: 0

The

VLAN Priority (Ethernet

Port Attribute)

parameter

specifies the priority of the default
VLAN ID of a port. It indicates the
priority of the service quality.
You can click

Priority (Ethernet Port
Attribute)

to display the detailed

information.

Entry Detection

Enabled, Disabled
Default value: Enabled

The

Entry Detection (Ethernet

Port Attribute)

parameter

specifies whether to identify the
tag labels in the data packets.
You can click

Detection (Ethernet Port
Attribute)

to display the detailed

information.

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide

4 Configuring Ethernet Services

Issue 02 (2011-06-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

4-137

«
...
289
290
291
292
293
...
»

Содержание OptiX OSN 550























































































































































































































































































































































































































































































Отзывы:

Нет отзывов