Figure 5-43 Screen calibration page
Figure 5-44 Screen displayed when the calibration is complete
●
Calibrating the screen by DIP switch.
a. Flip toggle switch 1 for the LCD to ON, and others to the opposite
position, and wait for 3 seconds before calibrating.
b. Flip the fourth toggle switch to ON and others remain unchanged, the
screen calibration function is triggered.
After 15 seconds, a dialog box indicating Are you sure you want to
calibrate the screen? If you do not click Yes or No, calibration will
start automatically 10 seconds later. is displayed, as shown in
Figure 5-45 Confirming to calibrate the screen
NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
5 ACC Introduction
Issue 12 (2020-10-28)
Copyright © Huawei Technologies Co., Ltd.
128
