4
3
Setting the Network-Access Parameters
By configuring the MT886 and your computer, you can choose any of the following
methods to surf the Internet:
Accessing the Network Through the Embedded PPP Dial-up Software on the
MT886
Accessing the Network Through the PPP Dial-up Software on Your Computer
3.1
Accessing the Network Through the
Embedded PPP Dial-up Software on the
MT886
If you select this method for accessing the network, the MT886 starts to set up a dial-up
connection automatically after the startup. You can access the network after you power
on your computer. You do not need to install any special dial-up software on your
computer or perform dial-up operations on your computer. To configure the MT886
and your computer for the network access, do as follows:
Step 1
Log in to the Web-based configuration utility of the MT886.
1.
Launch the Internet Explorer on your computer. Enter
http://192.168.1.1
in the address bar, and then press
Enter
.
2.
In the displayed dialog box, enter the user name and the password, and
then click
OK
.
By default, the user name is
admin
and the password is
admin
. After the
user name and the password are verified, you can access the Web-based
configuration utility.
Step 2
Enable the embedded dial-up function.
1.
In the navigation tree on the left of the Web-based configuration utility,
choose
Basic
>
WAN Setting
.
2.
Select a PVC number, such as
1
, from the
PVC
drop-down combo box.
3.
Enter the VPI and VCI that are provided by the network operator in the
VPI
and
VCI
text boxes.
4.
Select
Yes
from the
Active
drop-down combo box.
5.
Select
Routing
from the
Mode
drop-down combo box.
6.
Select
PPPoE
from the
Encapsulation
drop-down combo box.
7.
Enter the user name and password that are provided by the network
operator in the
Username
and
Password
text boxes, and keep the default
settings of other parameters.
8.
Click
Submit
to save the settings.
After you complete the preceding settings, you can surf the Internet.
