background image

 

 

Precautions 

To use the device properly and safely, read the precautions carefully before using the device and 
strictly observe these precautions when using the device. 

Security warning and Precautions: 

 

Do not look directly into the optical port without eye protection. 

 

Keep the device out of the reach of children as the components or accessories may be 
swallowed. 

 

Install the device in strict compliance with the requirements of the supplier. Reserve a 
space  of  at  least  10  cm  above  and  around  the  device  for  heat  dissipation.  During  the 
installation, keep the device away from electric appliances that generate strong magnetic 
or electric fields, such as microwave ovens, refrigerators, and mobile phones. 

 

The power supply voltage of the device must meet the requirements on the input voltage 
of the device. 

 

Do not use any power adapters that are not in the standard configuration. Otherwise, the 
device may be abnormal or unsafe. 

 

Dry your hands before connecting or disconnecting cables. Stop the device and switch 
off the power before connecting or disconnecting cables. 

 

Do not place any object on the device, so that the device  will not be damaged due to 
overheating or deformation. 

 

Prevent objects, such as metal, from entering the device through the heat dissipation hole. 

 

Switch off the power and disconnect all cables, including the power cable, optical fiber, 
and network cable, during periods of lightning activities. 

 

Do not lead the strength member of the optical fiber or other metal parts indoors. Do not 
install telephone lines, network cables, power adapters or power adapter cables outdoors. 
Adopting these measures will help prevent device damage and bodily injuries which are 
especially prone during thunderstorms. 

 

If an abnormality occurs, for example, liquid entering the device, smoke, unusual sound, 
and smell, stop the device immediately, switch off the power, disconnect all cables (such 
as  the  power  cable,  optical  cable,  and  network  cable)  to  the  device,  and  contact  the 
authorized service center. 

 

Do not disassemble the device without permission. In the case of a device fault, contact 
the authorized service center. 

 

Dispose  of  the  packing  materials,  expired  batteries,  and  old  or  abandoned  devices  in 
accordance to local laws and regulations (recycling them is strongly recommended). 

 

Do not change the structure, safety design, or performance design of the device without 
prior authorization. 

Fire Warning and Precautions: 

Содержание MA5821



















Отзывы: