manualshive.com logo in svg

Huawei LUNA2000 Series, Руководство пользователя

Поделиться
Скачать
Huawei LUNA2000 Series Скачать руководство пользователя страница 14

Moving Heavy Objects

●

Be cautious to avoid injury when moving heavy objects.

●

When moving the equipment by hand, wear protective gloves to prevent

injuries.

1.7 Commissioning

When the equipment is powered on for the first time, ensure that professional

personnel set parameters correctly. Incorrect settings may result in inconsistency

with local certification and affect the normal operation of the equipment.

1.8 Maintenance and Replacement

D ANGER

High voltage generated by the equipment during operation may cause an electric

shock, which could result in death, serious injury, or serious property damage.

Prior to maintenance, power off the equipment and strictly comply with the safety

precautions in this document and relevant documents.

●

Maintain the equipment with sufficient knowledge of this document and

using proper tools and testing equipment.

●

Before maintaining the equipment, power it off and follow the instructions on

the delayed discharge label to ensure that the equipment is powered off.

●

Place temporary warning signs or erect fences to prevent unauthorized access

to the maintenance site.

●

If the equipment is faulty, contact your dealer.

●

The equipment can be powered on only after all faults are rectified. Failing to

do so may escalate faults or damage the equipment.

●

Do not open the cover without authorization. Otherwise, electric shocks may

occur, and the resulting faults are beyond warranty scope.

●

Installation personnel, maintenance personnel, and technical support

personnel must be trained to operate and maintain the equipment safely and

correctly, take comprehensive precautionary measures, and be equipped with

protective instruments.

●

Before moving or reconnecting the equipment, disconnect the mains and

batteries and wait for five minutes until the equipment powers off. Before

maintaining the equipment, check that no dangerous voltages remain in the

DC bus or components to be maintained by using a multimeter.

LUNA2000-(5-30)-S0

User Manual

1 Safety Precautions

Issue 01 (2020-10-20)

Copyright © Huawei Technologies Co., Ltd.

8

Содержание LUNA2000 Series

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды