Green, on, the USB Stick is connected to a GPRS/EDGE network.
Blue, on, the USB Stick is connected to a WCDMA network.
Cyan, on, the USB Stick is connected to a HSPA+ network.
Off, the USB Stick is removed.
q
SIM/USIM Card Slot
It is where you insert the subscriber identity module/UMTS subscriber identity
module (SIM/USIM) card.
r
Micro SD Card Slot
It is where you insert the Micro Secure Digital Memory (SD) card
Getting Your USB Stick Ready
1.
Remove the back cover of the USB Stick.
2.
Insert the USIM/SIM card and the micro SD card into the card slots. Make sure
that the cards are properly inserted.
3.
Install the back cover of the USB Stick.
Note:
Do not remove the Micro SD card when it is being used. Removing the card during
an operation may damage the Micro SD card as well as the device, and data stored
on the card may be corrupted.
Installation/Removal Guide
On different operating systems (OSs), the installation and removal procedures
may differ. Follow the system prompts during operation.
Connecting the USB Stick with a Computer
Note:
First, power on the computer. Then connect the USB Stick with the computer.
Otherwise, the USB Stick cannot be installed as normal.
1.
Plug the USB Stick into the USB interface of the laptop or desktop computer.
2.
The OS automatically detects and recognises new hardware and starts the
installation wizard.
3.
Follow the prompts of the installation wizard.
4.
After the program is installed, a shortcut icon for the USB Stick management
program is displayed on the desktop.