Huawei IPC6122-P, Руководство по настройке

Страница: 63 / 115

Step 2 Click Add in the SNMP v3 user information area.
The page for configuring SNMP v3 user information is displayed, as shown in Figure 7-14 .
Figure 7-14 Configuring SNMP v3 user information
Step 3 Set parameters. For detailed parameter description, see Table 7-2 .
Table 7-2 Parameter description
Parameter Description
User name User name for the NMS to visit the IPC. This parameter is set
on the IPC, which must be the same as that configured on the
NMS.
NOTE
l A user name consists of 5 to 16 characters.
l A user name contains characters including digits and case sensitive
letters.
Security Security level of user rights. The options are as follows:
l No security
Users are not allowed to view or modify IPC configurations.
l Authentication
Users can only view IPC configurations.
l Authentication and privacy
Users can view and modify IPC configurations.
Authentication protocol This parameter is available only when you set Security to
Authentication or Authentication and privacy .
Protocol for user authentication.
Authentication
password This parameter is available only when you set Security to
Authentication or Authentication and privacy .
Password for user authentication.
NOTE
The password must meet the following requirements:
l The password consists of 8 to 20 characters.
l The password contains at least two types of the following:
lowercase letters (a to z), uppercase letters (A to Z), digits (0 to 9),
and special characters (including the space character and the
following: `~!@#$%^&*()-_=+\|[{}];:'",<.>/?).
l The password must be different from the user name or the reverse
text of the user name.
IPC6122-P
Configuration Guide
7 Setting Network Parameters
Issue 02 (2016-04-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
58