IPC2702-VF-VP
Quick Start Guide
2
Device Ports and Description
Issue 10 (2014-02-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
Port
Description
SD card
indicator
Indicates the SD card status. The status is described as follows:
Off: No SD card is inserted.
On: An SD card is inserted.
RESET button
Restores the camera to the factory settings by pressing and
holding this button for more than five seconds.
Network
indicator
When plug into the network cable, the red indicator on and the
green indicator is flashing which in the adjacent position.
Alarm input/output device connection
Vandal dome network camera can connect 1 alarm input and 1 digital output. Alarm
input connection is shown in Figure 2-4.
Figure 2-4
Alarm input connection
In alarm configuration web:
If the
Alarm level
is set to
Low
, the camera will not alarm when the alarm input
terminal signal is low, but alarm when the alarm input terminal signal is not low
(high level).
If the
Alarm level
is set to
High
, the camera will not alarm when the alarm
input terminal signal is high, but alarm when the alarm input terminal signal is
not high (low level).
Figure 2-5 shows the alarm output connection.
