14
Step 1
Press and hold the
WPS
button for over 1 second on the side panel of
the HG532s.
The
WPS
indicator on the HG532s starts blinking, indicating that the
HG532s is in the WPS negotiation state.
Step 2
Within 2 minutes, enable the WPS negotiation function on the
computer.
Wait for a while, the
WPS
indicator of the HG532s stops blinking and
remains on, indicating that a wireless connection is set up between the
HG532s and the computer.
−
You need to wait for 10 seconds to 120 seconds.
−
The
WPS
indicator is on for about 300 seconds, and then turns off.
4.2
Setting up a Wireless Connection Manually
If your network adapter does not support the WPS function, you can also set up
a wireless connection manually.
The following example uses a computer running the Windows XP operating
system to describe how to set up a wireless connection using the
default wireless network name and password:
Step 1
Start the wireless configuration service of the Windows XP operating
system as follows:
1. Right-click
My Computer
to display a short-cut menu, and choose
Manage
.
2. In the
Computer Management
window, choose
Computer
Management (Local)
>
Services and Applications
>
Services
.
3. Right-click
Wireless Zero Configuration
to display a shortcut
menu, and choose
Properties
.
4. Check that
Service status
is
Started
. If
Service status
is not
Started
, click
Start
.
5. Click
OK
to close the dialog box, and the close the
Computer
Management window
.
