Settings
dialog box, ensure that the
Use a proxy server for your
LAN (These settings will not apply to dial-up or VPN
connections)
check box is cleared.
Step 8
Try to access multiple Web sites to check whether the terminal can access
these Web sites.
If the terminal still cannot access Web sites, contact your network service provider.
What can I do if Web pages often cannot be displayed during Web page browsing
and can be displayed after the terminal is restarted?
Step 1
Ensure that the terminal and other devices, such as telephones or fax
machines, are connected to telephone lines through a splitter.
For details about how to install a splitter, see the related description in the
manual.
Step 2
Ensure that telephone lines are properly connected.
If the telephone lines are improperly connected, the stability of the
network connection is affected.
Step 3
Check the positions of your terminal and your computer. Ensure that they
are far from electric appliances, such as microwave ovens, refrigerators,
or cordless telephones, that generate strong magnetic or electric fields.
If the problem persists, contact your service provider.
Does the WPS function have any special requirement on the wireless encryption
settings of the HG532c?
The WPS function can be used only when the security mode of the WLAN is set to
WPA-PSK
or
WPA2-PSK
and the SSID is set to
SSID1
. It is recommended that
you set the security mode to
WPA-PSK/WPA2-PSK
for the WLAN.
If my computer fails to connect to a WLAN after I press and hold the WPS button,
what should I do?
Step 1
Ensure that only one computer is trying to connect to the router through
the WPS function at a particular moment.
Step 2
On the router, ensure that the wireless network function and the WPS
function implemented through the PBC method are enabled. Note that on
some wireless routers, the WPS function is forcibly disabled if the WEP
encryption is used for accessing a wireless network.
Step 3
Ensure that the security mode of the WLAN is set to
WPA-PSK
or
WPA2-PSK
and the SSID is set to
SSID1
. Note that the WPS function of
the router is forcibly disabled if the WEP encryption is used for accessing
a WLAN.
Step 4
Check the positions of the wireless router and the PCs. Ensure that they
17