
HUAWEI HG256s
User Guide
8 FAQs
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
8-1
8
FAQs
Q 1:
Can I use the HG256s as a DHCP server?
Yes, you can. The HG256s incorporates the DHCP server software.
Q 2:
How can I quickly restore the default settings of the HG256s?
When the HG256s is powered on, press and hold the RESET button for more than 3s,
and then release it. Then the HG256s automatically restarts and the default settings are
restored.
Q 3:
What can I do if I cannot access the HG256s configuration page?
Step 1
Check the IP address of your computer and ensure that this IP address is in the same
network segment as the LAN IP address of the HG256s.
Step 2
Ensure that your Web browser does not use a proxy server.
Step 3
Ensure that you have entered the correct user name and user password that are used for
accessing the HG256s configuration page.
If the problem persists, restore the default settings of the HG256s.
----End
Q 4:
Does the WPS function have any special requirement on the
wireless encryption settings of the HG256s?
The WPS function can be used only when the security mode of the WLAN is set to
WPA-PSK
or
WPA2-PSK
and the SSID is set to
SSID1
. It is recommended that you set
the security mode to
WPA-PSK/WPA2-PSK
for the WLAN.
Q 5:
If my PC fails to connect to a WLAN after I press and hold the
WPS button, what should I do?
Step 1
Ensure that only one computer is trying to connect to the HG256s through the WPS
function at a particular moment.
Step 2
On the HG256s, ensure that the wireless network function and the WPS function
implemented through the PBC method are enabled.