Quick payments
Method 1: Place the watch face close to the sensor area of a POS device, wait unit the card
swiping screen is displayed, select a bank card, enter the screen PIN of the watch for payment
verification, and place the watch face close to the POS device again to finish the payment.
Method 2: Enter the app list of your watch, touch Wallet to access the card list, select a
bank card, touch Pay, and place the watch close to the sensor area of a POS device to finish
the payment.
Method 3: Open the Health app, go to Devices > Wallet, and select a bank card to set it as
your default card. Swipe left on the home screen of the watch, wait unit the card swiping
screen is displayed, touch Pay, and place the watch close to the sensor area of a POS device
to finish the payment.
•
You can only make quick payments after your bank card is activated on the watch.
Swipe up or down to enter the screen of the bank card you want to use and activate
the bank card.
•
When your watch screen is locked, you will need to unlock the screen before swiping a
bank card.
•
You can view the supported banks on the screen for entering a bank card number.
Removing a bank card
1
Open the Health app, touch Devices and then your device name, touch Wallet, and select
the bank card you want to remove.
2
Touch in the upper right corner and remove the card. Follow the onscreen instructions
and touch OK.
Deleting the screen PIN will remove all bank cards linked to your wearable device.
Assistant
29